WhereIsIt? version 1.0 Final Release
Copyright (c) 1997 Robert Galle
All Rights Reserved


PROGRAM HISTORY
===============

Version 1.0 FINAL - 31. December 1997
-------------------------------------
+ Updated installation script to include the latest COMCTL32.DLL files for
  both Win95 and NT, and made possible for install program to update these
  files by itself, if necessary.
+ Finally added custom reports to report generator. You can visually select
  items to include in a catalog tree display - what is visible in tree, this
  will be printed. There are also a few macro commands to make selection
  easier, and you can save prepared report layout to file.
+ Added a new option to exclude items compressed inside archive files from
  searching.
+ Added new shortcut Shift-F10 to bring up item's context popup menu.
* Finally located and fixed the problem where some descriptions in catalog
  were not preserved after updating disk data.
* Fixed a nasty problem with new categories display from the previous
  release. For some catalogs, categories displayed in columns were not the
  right ones.
* Fixed searching by Created and Last Accessed dates, which had sometimes
  incorrectly returned all compressed files.
* Fixed a few problems on Windows NT, especially for those users running new
  Internet Explorer 4.0 with active desktop installed.
* Fixed handling of Audio CDs on Windows NT. It seems that CD-ROM driver
  in Windows NT handles Audio CDs a bit strangely compared to Windows 95, and
  program is now adjusted to that behavior.
* Fixed numerous small bugs I managed to find in the last week, mostly
  user-interface related that might show under certain conditions. Hopefully,
  program is more or less clean now.
- Note to previous users of WhereIsIt: this final release will "upgrade" your
  existing catalogs, the first time they are loaded in the program. Each
  catalog will be marked as modified after loading, and rebuilt from scratch
  when saved. This is done to enable all of us a fresh start, filtering out
  all possible problems inside catalogs that could be left over from beta
  versions.

Version 1.0 RC4 - 20. December 1997
-----------------------------------

+ Added a new command: "Copy To..." With this one, you can copy one or more
  selected files and folders from the catalog to some other folder of your
  choice. Selected items don't have to have the same origin; you can select
  to copy items originating from different disks with one single command,
  and program will prompt you to insert appropriate disks during copying.
  Ideal if you have grouped items of interest in Search Results list or in
  the User List, and want to copy them somewhere else.
+ Added categories to be displayed as columns in most item lists.
+ Added option to disable auto-hiding descriptions shown as tool-tips. Until
  now, you could only set how long will it stay on screen, up to 15s.
+ Search window will now remember last expanded size, and will set it the
  same next time.
+ Report generator is faster and a bit smarter when generating reports.
  Sorting items by source is MUCH faster now, and is done only the first time
  when printing or previewing the report, not every time.
+ Provided are ways to cancel report generation, printing, or exporting it at
  any given moment, and added some additional progress indicators.
+ Made some small changes to how categories are handled, and improved a bit
  on associated dialogs.
+ Added ability to search for items without assigned category.
* Fixed a few problems regarding printer settings in report generator. There
  were problems with printing to non-default printer, to printer with default
  paper orientation set to landscape, and printers set in Report Setup and
  Printer Setup dialog sometimes did not match. Also added more available
  paper sizes for your reports.
* When printing reports, number of copies and collate printing now works
  correctly.
* Fixed a problem with DiskInfo button in Add Disk dialog.
* Fixed support for some disks (partitions) over 2.1 GB.

Version 1.0 RC3 - 8. December 1997
----------------------------------
+ Reports had some major improvements in this release. Items in report can
  now be grouped by their origin (catalog, disk, folder), and printed with
  appropriate headings. Icons can be optionally included in report, adding
  some graphics to the printout. Report sections can now have customizable
  background color, allowing you to make color bands for titles etc, and
  some new sections were included (headings for grouped items).
+ Added possibility to use some external shell program instead of Windows
  Explorer with "Open in Explorer" command.
+ Added "Open Description Assistant" to available file double-click actions.
+ In full-screen print preview mode, status line is no longer displayed, in
  order to maximize visible page area.
* Fixed repainting buttons in report preview toolbar after changing page.

Version 1.0 RC2 - 26. November 1997
-----------------------------------
* Fixed loading position for dialogs like Search and User List that did not
  work correctly for some users of RC1 version. The RC2 will fix this problem,
  as well as prevent any problems resulting from this misbehavior in RC1.
* Made some changes trying to prevent problems with saving files, as
  reported by one user. Saving should be more fail-safe now, and should at
  least report a problem if there is one.
* Improved saving procedure when operating in low disk space condition, like
  when saving catalog to floppy disk, or a very full hard drive. The new
  procedure is much more robust, and will sometimes manage to get job done
  where older versions couldn't.
* Fixed a problem with toolbar positioning when it is floating on program
  startup.
* Fixed some broken links in the help file.

Version 1.0 RC1 - 14. November 1997
-----------------------------------
+ Closing catalogs is now about twice faster as it was before. This also
  affects the total shutdown time, cutting it to half.
+ Improved a bit on start-up time, and reduced program's memory consumption.
+ Exporting reports to ASCII files is done properly now, and few new options
  are now available when exporting (normal, tab-delimited or comma-separated
  columns to choose from)
+ Added a new option to display settings, to disable smooth scrolling while
  expanding or collapsing tree nodes in main window. Smooth scrolling is
  automatically active in entire Windows system if using a newer Comctl32.dll
  library, included with Internet Explorer 4.0, for example.
+ Added zoom cursor to report preview; left click on report area will perform
  zoom in, and right click will zoom out.
+ Removed some flickering in report preview when changing pages.
+ Description Assistant window will now save its size and position.
* Prevented the '..' folder from appearing in reports.
* Searching for duplicates did not find all duplicate files in some special
  cases. Fixed.
* Fixed support for disks (partitions) larger than 2.1 GB.
* Fixed a problem that may occur when printing report. If print job was
  canceled from Windows while program was still busy printing, WhereIsIt?
  had some major problems handling this situation in 0.99 version.
* Fixed some problems with updating main window while moving or copying
  disks with Catalog Manager.
- Custom reports will probably have to wait until the 1.1 release, there is
  just too much to do about them if I want to do it right.

Version 0.99 - 6. November 1997
-------------------------------
+ Brand new report generator with print preview is finally included in
  this release! It is not completely finished, some functionality is yet
  to come (custom reports), but you can get the general idea. Visual
  appearance of a report can be customized, and complete print preview
  is in there, with background page generation, zoom, full screen mode
  and all. Exporting to ASCII files is just basic at this stage, though,
  and there may be some minor problems left to solve later. A lot of fresh
  coding was done in a very short time for the new report generator, and
  some bugs are probably fair to be expected in this release. Let me know!
  Check the "reportg.txt" file for some more development details.
+ Extended "Compare Files to Catalog" option to compare not only to one
  whole catalog, but to allow user to select which disks or catalogs to
  include in compare (just like in Limit Search option). Also, added a
  "Cancel" button to interrupt the process if it takes too long.
+ Added a new feature in search by filename: if program detects that data
  to search for is in a file mask format (using '*' and '?' characters),
  it will automatically switch to 'Search by File Mask' mode, regardless
  of previous setting (default is 'Part of Filename' setting).
+ Improved handling of international characters in filenames.
+ Improved detection of multi-session CD-ROMs where Windows may return
  incorrect total media size (only the last track is counted).
+ Added Ctrl-PgUp to act the same way as a backspace, or a Back button,
  just like it does in popular Norton Commander. Also added Ctrl-PgUp
  and Ctrl-PgDown shortcuts to switch tabs in Compare Results window.
* Fixed disk properties dialog for users with small font setting.
* Fixed a dialog for disk selection shown when at least two disks with the
  same parameters already exist in catalog when adding a new disk. For
  users with small font setting only, window with disks list was not
  resized properly, covering the buttons at the bottom completely...
* Fixed searching by filemask. In some special cases, searching failed to
  correctly locate items.
* Fixed some minor problems with extracting from RAR files when they are
  in the right pane of the main window.
* Fixed some minor problems with recognizing some rare TAR files, and
  adjusted .Z and .GZ files handling.
* Fixed some problems about importing descriptions from Files.bbs files.
* Fixed disk properties dialog for users with small font setting.
* Some other minor adjustements that came my way...

Version 0.90.9b - 26. October 1997
----------------------------------
+ Added .Z (Unix compress) archive recognition, and .LZH extraction support.
+ Added small fancy tabs in Compare Results window, for easy switching
  between lists as well as better preview of compare results.
+ Added progress bar indicator when program is loading catalog data needed
  to search for files in that catalog ("Compare Files to Catalog" option).
+ Added new option in Display Settings to enable/disable showing keyboard
  shortcuts inside button tooltips. If this is enabled (default), tips
  will have shortcut information appended, f.e. "Open Catalog (Ctrl-O)"
+ Extended support for NTFS volume labels that can be up to 32 characters
  long (compared to 11 characters in (V)FAT, FAT32, or CDFS)
+ Added F4 shortcut in Search window and User List to access properties,
  and added Ctrl-I shortcut for ASCII Viewer.
+ When using external ASCII viewer, program will now always pass filename
  to view enclosed between two double-quotes. This should allow some
  applications proper long filename handling when spaces and other "invalid"
  characters are used in filename. Also, a new option was added to force
  using short filenames only when running external viewer program.
* Extracting from RAR archives was broken in 0.90.9, now it's working again.
* Quick-search introduced in previous version was not setup correctly for
  the new Compare Results window when new items were displayed. Fixed.
* Fixed importing description priority order (archive comments always had
  priority over File_id.diz inside archive, whatever the settings was).
* When updating disk data with "Quick scan" option on, folder sizes may
  have been calculated incorrectly. Fixed.
* Importing descriptions like File_id.diz from inside compressed files
  sometimes did not work correctly if lower-case chars were used in the
  filename. Fixed.
* Number of folders was sometimes reported incorrectly as 65535 for empty
  disks. Fixed.
* If trying to open already opened catalog, exception error would show. Fixed.
* Picture for disabled View button in Search window was displayed incorrectly.

Version 0.90.9a - 22. October 1997
----------------------------------
+ Added a new option to check if files located somewhere on your drive are
  already stored somewhere in the catalog. As a result you will get three
  lists of files, telling you which files are new, which were found to be
  the same in the catalog and which were only matched by name, but not
  other properties, like size or date .Using this, you should be able to
  avoid storing the same files to many different places.
+ Added 'View File' command as a choice for double-click action.
+ Changed the 'Clear previous search results' in Search dialog to be checked
  by default.
+ Enabled quick search in all list windows: if you want to select a known
  item on the list (file, folder,...), just start typing its name -
  selection will be repositioned to the first item with name matching to
  what you have typed.
+ Introduced a small delay before updating the left window when moving
  selection through the treeview using your keyboard. This prevents
  unnecessary flicker (left list will be updated in 0.5 seconds after you
  stop moving). If using your mouse, however, left window will still be
  updated at once.
* Fixed ASCII viewer settings, rich-text format parsing was active for all
  files, not only *.rtf (some rare text files would appear truncated).

Version 0.90.9 - 19. October 1997
---------------------------------
+ Help file has been dramatically improved, and more dialogs now have
  context-sensitive help available, including the options and main window.
+ New option to compare data in catalog against current data on media is
  introduced in this version. You can now compare the contents of any disk
  or folder in the catalog to its origin, in order to find files that are
  new, deleted, changed, or the same as in time of cataloguing this data.
+ The main toolbar can now be customized! You can rearrange buttons and
  separators, and select which buttons will appear on toolbar and which not.
  This became necessary since new version has even more available buttons
  and toolbar may simply get too big to see for some users.
+ New internal ASCII viewer can show you the contents of any (text) file
  right out from WhereIsIt. It is no longer needed to have certain file
  types registered with Notepad and launch them in order to see their
  contents.
+ Added Unix GZIP and UnGZIP support (.gz file extension)
+ Searching is about 25% faster and safer than before, due to optimized
  search thread settings.
+ Added ability to change disk serial number in Windows NT, too.
+ Added some safe-guards when ejecting disk under NT. This should allow to
  safely remove media from drive, without interrupting the system.
+ When program is already running, and user double-clicks catalog file in
  Explorer, or runs another instance of program with catalog filename as
  a parameter(s) to load, the running instance will be notified and will
  try load the specified catalogs.
+ Improved settings dialog. Tabs now have small images on them and a few
  pages have been changed and added to adjust for new options.
+ Extended Quick-Setup Wizard with some new settings.
+ Sizes for files and folders now have thousands separators for easier
  reading. Also, you can now set in program's settings if you want sizes
  displayed as numbers (i.e. 665.795) or formatted printout (i.e. 650.2 kB)
+ After returning to previous folder, by selecting '..' folder or pressing
  the Back button, previously selected folder is now selected by default.
+ Updating disk image with quick-scan option turned on and lots of compressed
  files in the same folders will be much faster now.
+ Removed all flickering on toolbar buttons in Search and User List windows
  when moving selection through items.
+ When creating a new catalog, program will now ask you for the name of the
  catalog (in previous versions, name was auto-assigned as 'CatalogNN',
  which is now only the default value in the edit box when you are asked).
+ Added option to create backup (.BAK) files while saving catalogs.
+ Added a default path to catalog files in program settings.
+ Improved multi-instance detection, now it's more fail-safe and robust.
+ Installation files like Setup.exe and Install.exe will now have a special
  icon, different from other .exe files.
* Fixed a bug that may cause the catalog to become corrupted. This would
  only happen if updating disk image was canceled, you were using quick-scan
  option, catalog contained some archive files, and was later on modified
  and saved. Considering all this, most users should be on the safe side,
  but still, I am glad this bug is out.
* Fixed a problem where a disk scan was sometimes terminated with
  explanation that error has occurred during disk scan. This was traced back
  to archive files with dates older that 1.1.1980 (only possible to find on
  some CD-ROMs, disks with NTFS, but not on disks formatted with FAT).
  Thanks to Mr. Richard Hieber for detailed analysis on this problem.
* Fixed some problems when updating virtual disk image.
* Fixed keyboard interface in Found List and User List. Keys like Enter,
  Alt-Enter, Delete, Shift-Delete etc. will now work properly.
* If user would switch to User List or Search window in the same moment
  while program is busy closing catalog(s), program would crash. Fixed.
* Fixed counting files on disk update. Archive files like zip, arj,... were
  not correctly counted in some cases when browsing inside archive files
  option was enabled. This caused that total files on disk or in catalog
  were displayed too low.
* Fixed TAR support. Third-parity component used in WhereIsIt? for most
  compressed file support had a problem detecting valid TAR files.
* If trying to autoload catalog that does not exist any more, program would
  report another error after correctly notifying the user about inaccessible
  catalog file. Fixed.
* Many other minor improvements and fixes were added.

Version 0.90.8b - 21. September 1997
------------------------------------
+ Changed Ctrl-X shortcut in main menu for program exit into more standard
  Alt-F4. Ctrl-X can be used for 'cut' operations where supported. Also
  added F3 shortcut to bring up Search dialog, and F4 to bring up item's
  properties.
+ ESC key will now work in Export Descriptions dialog as Cancel button.
* Fixed problem with double-click on found list items. Item would stay
  selected from drag&drop operation.
* Selected items will now be preserved after sorting.
* Fixed error with exporting descriptions when program would report an
  error if subfolders checkbox was checked. Some last-minute changes
  before releasing the 0.90.8 broke this.
* Fixed some other minor bugs I found in the process.

Version 0.90.8a - 14. September 1997
------------------------------------
+ Added iomega JAZ drive recognition and icon (Win95 only).
* Fixed a problem regarding updating removable drives stored in existing
  catalogs that are now recognized as zip or jaz drives.
* Fixed a minor bug about preserving descriptions on disk update.
+ Some other minor improvements have been added.

Version 0.90.8 - 12. September 1997
-----------------------------------
+ Added option to export descriptions back to media, in either of three
  supported descriptions formats (File_id.diz, Descript.ion, Files.bbs).
+ Added drag & drop capability for adding to User List and moving disks
  between catalogs. Program is now also capable of accepting drag&drop
  catalog files from other programs (like Explorer), opening them in
  WhereIsIt as a result.
+ Added option to eject media after adding/updating it in catalog.
+ Added a new option to change disk serial number if the same is found
  on another disk in catalog. This will only work on Windows 95 at the
  moment, I still need some details for Windows NT on this.
+ Search and User List windows will now save their size and position, and
  they both have buttons to always stay on top of other windows if desired.
+ In Search dialog is a new checkbox to clear previous search results
  when starting a new search.
+ Extended archive file support with Unix TAR/UnTAR.
+ Archive file support can now be customized, by enabling or disabling
  each of supported archive types. This allows you to enable only those
  archives you are using, allowing some faster disk scanning.
+ Two new options are present in disk scan dialog: you can choose if you
  will allow quick archive file scan when it already exists in the catalog
  and has not changed, and you can choose to browse archive files only
  for descriptions, not their contents.
+ Disk scan algorithm has been optimized to reduce number of disk's head
  movements during an add/update disk operation. This should result in
  faster and smoother disk reading on slower devices.
+ Added iomega ZIP drive recognition (Win95 only). No more "default"
  removable-drive icon! For all other drives, I only need to have their
  signatures. If you have a removable drive, and would like to have it
  recognized by name and type, contact me by e-mail for simple instructions
  what I need to have from you. I am still looking for way to do the same
  in Windows NT.
+ Added some new options when launching EXE files from inside archive files.
  In many cases, exe files need to have all distribution files available
  to run properly, not only the .exe file. Program will now offer an option
  to extract entire archive to temporary folder first and run the exe file
  from there. This should be enough to enable running most installation
  programs right out of WhereIsIt?, even if they are compressed.
+ When first item is found while searching, focus is placed on that item,
  and list is scrolled so item is visible. This way, you can always see
  which items were added in current search, and which are left from before.
+ Folders from compressed files are no longer stored as separate items in
  catalog. Only compressed files will be analyzed.
+ Extracting from RAR solid archives is now faster and optimized.
+ Added total files/folders display to catalog's properties
+ Added F2 shortcut for renaming items (same as in Explorer)
+ Program's shut down time has been optimized, and it is now about twice
  as fast as before.
+ Screen updates were further optimized, resulting in faster browsing
* Fixed RAR and CAB support. Browsing those files should now finally work
  properly. Due to fixed bug in multi-volume CAB support, updating disks
  with such files will be much faster now.
* Fixed a few Catalog Manager problems, the worst of them sometimes missing
  files in root folder after moving disks between catalogs.
* Improved unARJ support. Previous version did not support files compressed
  with -m4 method.
* When trying to change category for item in the left tree pane, item was
  always marked as without category. Fixed.
* Fixed a very inconvenient bug where sometimes disk descriptions were not
  preserved after updating the disk.
* Program will now correctly filter out EOF characters from imported
  descriptions where present.
- Extracting from CAB files was (temporary?) removed. It was not working
  as it should.

Version 0.90.7a - 16. August 1997
---------------------------------
* Small bug-fix release. Importing from Floppy Master had some problems,
  and extracting files from compressed files during disk scan did not
  always work correctly. Some other minor fixes are there, too.
* A nasty last-minute bug crawled in the new Catalog Manager, causing GPF
  on move and copy operations.

Version 0.90.7 - 14. August 1997
--------------------------------
+ Sorting and browsing is now about three times faster than it was before,
  and there is much less flicker. Sorting by Disk name and Location (folder,
  where you can find an item) is more than 15 times faster, with speed
  comparable to sorting by other sorting options. Also, now you can always
  cancel sorting with ESC key if you think it's still going too slow.
+ Added Catalog Manager, with ability to copy and move disks between
  two opened catalogs. Now you can arrange your existing catalogs as
  you wish. You can also rename, delete or access each disk's properties
  on the same spot.
+ Added virtual-root capabilities. You can create "virtual disks" in the
  catalog, with their root folder based on some existing folder other
  than "\" (much like DOS subst command). This way, you can break down your
  disk folder structure to more "virtual disks", or select only part of
  disk to be cataloged.
+ Added Quick-Setup Wizard to guide you through the most important setup
  settings. This is the easiest way to have program up and running without
  fear that you forgot to setup something important. During the process,
  you may also get to know some features of WhereIsIt? you were not aware
  of before.
+ Sorting dialog has a new user interface. Too many options available at
  once seem to be to confusing for some users, so program will now show
  only what is really needed for your selection. The whole procedure of
  selecting search criteria can now be completed faster, since program
  will auto-select the appropriate pages and place focus to control you
  will most likely need.
+ Added un-RAR support. Now you can extract files from RAR archives, too.
+ Lengthy file extractions from compressed files can now be canceled.
+ When updating disk, program can now (optionally) search for existing
  descriptions not only on the disk you are updating, but on all disks
  in the catalog. This means that if there is a file with description on
  any disk in the catalog, and that file matches the file currently updating,
  the existing description will be adopted by the new file (the same goes
  for folders, too). When adding a new disk, you may also enable searching
  through all other disks in the catalog for existing descriptions.
+ Optimized disk update speed. WhereIsIt? will now read only items that
  have changed since the last update in the catalog, noticeably speeding
  up the process. This is actually nothing new to WhereIsIt?, but in
  previous versions it was only enabled for registered users.
+ Improved disk selection dialog used when adding a new disk to catalog
  and there are already two or more disks with the same parameters. Now
  you can see details about each disk in selection list, sort disks and
  access their properties.
+ Added volume label column when displaying disk data.
+ Added standard popup menu to all multi-line edit controls (in Description
  Assistant, item's properties). There you have a quick access to Cut/Copy/
  Paste/Delete/Select All operations.
+ Add/update disk dialog was equipped with context sensitive help, as an
  introduction to start working on the "real" help file (actually, this was
  a place to do some help related testing for me...)
* Program will now ask to save changes in catalog if Windows shutdown has
  been requested.
* Fixed some sorting problems when reverse sorting was on.
* Fixed a bug when some descriptions from deep-nested folders were not
  correctly preserved when updating the disk.
* Fixed a bug in searching by date. Some code used for testing made its
  way to the release version and searching by date didn't work as it should.
* Disabled horizontal scroll-bar from appearing in the properties form's
  description window. In many cases it took up almost half of usable space
  in the already too small window. Vertical scroll-bar will still appear if
  necessary.
* Importing descriptions from 4DOS/NDOS description file now correctly
  supports long file names with spaces.
* Fixed occasional (and quite rare) problem with floating point error when
  trying to save catalog with one disk, and disk had no subfolders.
* Fixed some other minor problems, and added some other improvements in
  program appearance (folders starting with '.' are no longer ignored,
  Esc key will act as Cancel button in most dialogs,  Alt-Enter is available
  in tree view, too, some minor adjustments on how program behaves in some
  specific situations).

Version 0.90.6 - 20. July 1997
------------------------------
+ Windows NT 4.0 (and newer) support is finally there. This version of
  WhereIsIt? was developed and tested on the NT and many problems regarding
  this platform have been resolved in this release.
+ NEW! Extracting files from many compressed files is now possible directly
  from WhereIsIt?. Program internally supports extraction from ZIP, ARJ,
  ARC, LHA, ZOO and some CAB compressed files, allowing you to extract one or
  more files to any folder, launch files with associated programs from within
  compressed files, importing files like file_id.zip from compressed files as
  descriptions and so on... Other formats will eventually be supported, too, at
  least by a possibility to use external programs for extracting.
+ Added support for self-extracting exe files. Those can be recognized as
  normal compressed archive files, showing their contents as folders. Most of
  previously supported formats are now also supported by their sfx version.
+ Added Column Manager; now you can select which columns you want showing
  and in what order when data is displayed in the details mode. Just right
  click on column header or select option from main menu.
+ Improved searching - now you can search for disks, too, not only files
  and folders.
+ Improved duplicate searching. "Search by Name or Type" tab in search
  settings is now available for duplicates searching, too. With this,
  you can search for all duplicate files that match the file mask or file
  type; for example, all duplicate ".doc" files. Searching for duplicate
  disks is now possible, too.
+ Improved description importing on disk scan. The routines have been almost
  completely rewritten, and now you can select priority for description files
  to import (if description for an item is available from more than one
  source, it will be imported from the source with highest priority).
+ Description Assistant can now take advantage of new extraction capabilities
  and load files with useful information even if they are compressed inside
  archive files like zip, arj,.. Also, there is a new checkbox present to
  enable/disable OEM-to-ANSI conversion filter on description files (making
  them more readable by filtering out unusual characters).
+ Added column with item's description in found items list and user list.
+ Added capability to setup catalog categories directly from item's property
  form (there is a new "Edit" button to access category management).
* Progress bar flickering when searching for duplicates has been eliminated.
* Selecting action for double-clicking an item now works in the find window,
  too (previously, it always brought up item's properties).
* Fixed bug in searching for duplicates. Searching for files/folders setting
  did not work. There was also a nasty GPF if you were trying to close
  catalog while results of duplicate search were still listed in the search
  window. The algorithm used for searching for duplicate items was a bit too
  optimized for speed and sometimes missed some identical items.
* Fixed bug in importing 'descript.ion' files on disk scan. Program would
  sometimes terminate and cancel disk scan if it found a file with that
  name and this file was invalid for importing file descriptions.
* Launching associated programs with compressed files (zip, arj...) presented
  as folders in the catalog now works correctly.
* Improved internal icon handling, faster and more compatible with Windows NT.
* The reported bug about program using very small fonts in dialogs should be
  fixed now, but I have no way to verify that. If you notice anything weird
  about fonts it is using, please let me know...
* Fixed a few other bugs. Selected item statistics in status bar reported
  wrong selected size if '..' folder was selected. When reversing sort order,
  '..' folder was incorrectly moved to the end of list. There were some
  problems with enabling/disabling options and buttons (menu option was
  enabled and button for the same operation was disabled, for example).
  About box was a bit modified and WWW link now actually works.

Version 0.90.5 - 27. June 1997
-----------------------------
+ WhereIsIt? was migrated to a new version of Delphi, and adjusted to the
  new environment. This resulted in some improvements, including more
  flickerless display, solved problem with large tool-tips etc.
+ Added new toolbars, hope you like them (they look just like MS Office 97)
  Also added saving position for user-list toolbar and fixed some minor
  problems about toolbars. Also, now you can have old-style buttons on the
  toolbars if you can't stand those new, mouse-active flat buttons.
+ Searching for duplicate files and/or folders is finally implemented.
  You can set yourself what two items must have in common to be handled as
  the same (name, size, date&time, attributes).
+ Added support for browsing inside CAB files while adding disks.
+ Added ability to launch files from WhereIsIt? with associated programs.
  This requires media to be present, similar to 'Open in Explorer' option.
+ Improved description importing. All imported descriptions are now checked
  for DOS graphics characters and converted to plan ASCII. This should
  result in more readable and eye-pleasing descriptions.
+ Improved disk updating. If more disks with the same properties (serial
  number, label, size,...) are found in the catalog, you are now allowed
  to choose which disk to update, or to add it as a new disk.
+ In search window, the found list can be maximized and search settings
  hidden to get more useful space out of search window. Also, searching
  has been updated to display found items at once, during the search.
+ Added another option in program's settings: you can choose what double-
  clicking on file means: nothing, show properties, open in explorer, or
  launch file.
+ Reversing sort order (like second click on already sorted column) is
  much faster now. Reversing sort order now works in user list and found
  list, too (just click again the column you wish to sort by).
* Fixed problem with toolbar buttons sizes, introduced in 0.90.4. Only the
  first five buttons were adjusted correctly to applied size.
* Fixed problem with disk media updating. if updating double-density disk
  in a high-density floppy drive, program would not recognize it as a
  compatible device.

Version 0.90.4 - 6. June 1997
-----------------------------
+ This one took a little longer, but it brings quite a lot, too.
+ Media detection was almost completely rewritten in this release, and
  adding/updating disks in the catalog has changed a lot, too. Too much
  stuff to cover everything here, check out for yourself. This should
  resolve all the serial numbers troubles from previous versions (media
  detection is now based on media type, serial number, volume label,
  and total space on media). However, note the separate menu option for
  updating disk, on disk's popup menu.
+ Added ability to auto-import FILE_ID.DIZ files as folder description when
  scanning disks.
+ Added a new font setting, for description tool-tips. This is nice thing to
  have if you are importing a lot of text formatted descriptions like those
  in FILE_ID.DIZ files. With proportional font it looks a bit messy, and
  you can set it larger or smaller if you wish. Font setting page in general
  is a bit more user-friendlier now.
+ Click on the column header in details view, with already sorted items by
  that column will now sort items in reverse order (the same as pressing
  the reverse sort button).
+ Added catalog auto saving, on user defined intervals.
+ The '..' folder now always has a description, saying what exactly '..' is.
+ Added a new option in the settings, allowing you to sort archive files
  (zip, arj,...) that act like folders either as folders or as files.
+ Added time of day to existing update disk date. Now you can see not only
  the day when disk was updated in catalog, but time also.
+ You can now select to ignore hidden files, hidden folders, or Recycle Bin
  while performing disk scan.
+ Help file is now closed when program exits.
* Fixed a few bugs. Adding '..' folders to user list is not possible
  any more, and '..' folders were causing troubles when they were selected
  for category and flags setup. Category and flags setup had a bug involving
  saving categories, which were not always remembered as set. In Description
  Assistant, disabling search in subfolders for description files did not
  work right. Report generator sometimes went wild, too, skipping columns
  and every once a while repeating data.

Version 0.90.3a - 29. May 1997
------------------------------
* Bugfix release - took some time and fixed some minor bugs found so far.
- Temporarily removed support for Windows NT. Some reports have indicated
  troubles running WhereIsIt? on the NT, so this will have to wait until
  I have a chance to take a closer look on it.
* Improved install script should now take care of proper installing of
  the COMCTL32.DLL, the file causing many problems in the last few days.
  Also, program was modified so it can detect older versions of this file
  without crashing out with error messages.
* Fixed bug on searching - after completed searching, most folders would
  show no contents at all until catalog was reloaded.
* Fixed a bug on disk scanning, when old descriptions would be lost in some
  occasions even if an option to preserve them was checked.
* Some other minor bugs reported have been fixed, and small improvements
  requested so far are now implemented.

Version 0.90.3 - 28. May 1997
-----------------------------
* This version is out so early because of a bug found in a user interface.
  When fixing fonts in dialogs in the 0.90.2, I broke it even more for users
  with small font display settings. Much of text in the dialogs was
  displayed only partially or clipped away. This didn't show if you were
  using large font settings (I am, that's why I didn't notice anything)
+ To avoid having out a new version on bug-fix basis only, I also added
  support for extracting comments from compressed archive files. If archive
  file supports comments (ZIP, ARJ, RAR and ZOO do), WhereIsIt? can import
  them as standard file descriptions. To avoid confusion: archive comment
  is the thing you can write with "pkzip -z" command for ZIP files...

Version 0.90.2 - 26. May 1997
-----------------------------
* Fixed a nasty bug in the install procedure. File version checking did
  not work right, causing the comctl32.dll file being replaced even if
  there was a newer version already on the system. This could seriously
  impact Windows. Fortunately, the only known way to have a newer version
  of dll file installed is having Microsoft Explorer 4.0 in place before
  installing WhereisIt?. Thanks to Jan Libbenga (jali@worldaccess.nl) for
  reporting this.
* There was a report of a very small font being used in the program dialogs,
  making it almost unreadable. I couldn't confirm that bug, but I did some
  modifications regarding this and I hope it is OK now...
+ Added a help file, but quite a basic one for now, just to get you started.
  Writing proper help files may be very time consuming, and my time is kind
  of short at the moment. There will be a full-scale help file in the final
  release, I promise...
+ Added Floppy Master database import. All previous users of Floppy Master
  will now be able to use their old catalogs with WhereIsIt?. Still, it is
  highly recommended to rescan disks with WhereIsIt?, since the new database
  has a lot more information and support for disks and files than Floppy
  Master ever had.
+ Added multi-choice support in the left pane. Now you can select multiple
  items at once to perform an operation on, like adding them to the user
  list or setting categories and flags. Status bar has been improved to
  show a small statistics for all selected items.
+ Now you can set category or flags for more items at once, either from left
  pane list, found list after searching or from user list.
+ Added previous instance checking - if program is already running when user
  runs it, previous instance will become active instead of running another
  copy of program.
* The '..' folder is now always displayed on top, regardless of sorting.
* Fixed disk usage graph for empty disks (display was wrong).

Version 0.90.1 - 14. May 1997
-----------------------------
  First public release on the Internet

mid-April 1997
--------------
  Field testing started, WhereIsIt? is released to limited audience for
  evaluation and testing purposes.

January 97
----------
  WhereIsIt? development started
