	SysId Ver 1.4b By Lasse Jensen (Morf) All Rights Reserved.      
	-----------------------------------------------------------------------


	Target operating system
	-----------------------

	Runs on Windows 95/98/ME and Windows NT 4.0/2000
	
	Cpu's supported:

	Pentium / Pentium-MMX / Pentium PRO / Celeron (A) / Celeron /
	Pentium II / Pentium II Xeon /Celeron 2 / Pentium III /
	Pentium III Xeon / Pentium III (Coppermine) / Pentium 4

	K5 / K6 / K6-2 / K6-2+ / K6-III / K6-III+ / Athlon (Classic)
	Athlon (Duron) / Athlon (Thunderbird)

	Cyrix M1 / Cyrix M-II / VIA Cyrix III

	WinChip C6 / WinChip 2 / WinChip 3 / IDT WinChip 4

	Rise MP6 / Rise MP6-II

	-----------------------------------------------------------------------


	History
	-------

	Ver. 1.4b   '10/08/00'  Add a cpu speed check sum. Sent me your screenshot!!! (See below).

	Ver. 1.4a   '10/08/00'	The clock speed is now 100% accurate, and better Ahtlon L2 support (See below).

	Ver. 1.4    '23/07/00'	Add Athlon L2 cache speed W/R (See below), and PIII Serial number.

	Ver. 1.3a   '16/07/00'	PIII's and Physical memory are now displayed crrectly.

	Ver. 1.3    '06/07/00'	Add some new cpu's and cpu flags, and swapfile size in use.

	Ver. 1.2a   '04/04/00'	All Cpu's now displayed correctly.

	Ver. 1.1b   '01/04/00'	Add Cpu flags, and cpu Benchmark (See below).

	Ver. 1.0    '28/03/00'	First release!.


	Version 1.4b 
	------------

	Now I have made a CPU speed Checksum so that you can't cheat by changing the clock speed
	in a graphic program (Paint, Photoshop or other). So if you think your screenshot is worthy
	then send it to ME (core@teliamail.dk) and then I will put it on my site!
	Please sendt the screenshot's in JPG!, and don't sendt any if the clock speed is below 800 Mhz
	Happy overclocking


	Version 1.4a 
	------------

	Now you can add the L2 cache speed to your Windows startup (Win9x only).
	So you could disable the L2 cache in the BIOS and then overclock the CPU, and then go into Windows,
	and SysId will enable and set the L2 cache speed every time you boot into Windows.
	If SysId reports an error on the 'sysid.vxd' just copy it into 'Windows\system'.
	Many small bugs is also corrected in this version.


	Athlon L2 Button (Win9x only)
	------------------------------

	Whit this Button you can read the speed of the L2 cache of you Athlon (Classic).
	But you can also adjust the L2 cache speed of you Athlon (Classic).
	I don't think that you can damage you athlon with this, but be careful anyway!
	I DON'T take any responsibility for any damage that may occur by using this function.

	ONLY USE THIS IF YOU ARE KNOWING WHAT YOU ARE DOING!


	Refresh Button
	--------------
	
	This button only refresh the clock speed, all the memory stuff is refreshed every 1 second.


	Cpu Benchmark
	-------------

	Removed - Was to crappy 


	Reproduction/Distribution/Copy
	------------------------------

	SysId.EXE is FREEWARE as long as it is distributed under the
	conditions set below.

	The program may not be change in any WAY!.


	Copyright
	---------

	This program is FREE SOFTWARE.

	The author don't takes any responsibility
	for any damage that may occur by using SysId.


	Support

	-------

	HomePage :  www.sysid.subnet.dk		Available at '07/07/00'
	e-mail   :  core@teliamail.dk

	I would like to hear any kind of suggestions and compliments. 
	And if the program info is wrong please take a minut to take
	a screenshot and tell me the REAL spec's.


	Contact
	-------
	
	A BIG! Thanks to:
	
	Thomas Combelran for sending infomation's about the Athlon (L2 cache)
	Jonas Serverin for helping with some problem's

	-----------------------------------------------------------------------

        Copyright (c) 2000  By Lasse Jensen (Morf) All Rights Reserved.
