
 ========================================================================
   Welcome  to  Ami Mouse 97 !  -  A Giant Leap in Productivity.
 ========================================================================


This is Version 2.0 software for Ami Mouse 97.
(for Windows 95 and Windows 3.1)

\ADI-ONLY\README.TXT    11/10/95

*********** IMPORTANT *********
*  This is a protected-mode *DOS* driver for AutoCAD/386 for DOS.
   This driver is NOT necessary if you are using AutoCAD for Windows
   Release 12 or 13.
   This AutoCAD DOS driver is compatible with ADI version 4.2
   (AutoDesk Device Interface).
*********** IMPORTANT *********


Notes for the Ami Mouse 97 AutoCAD / ADI Installation:

*  If you are using the Ami Mouse 97 product with AutoCAD/DOS, then you
   should install both the ADI driver and DOS driver options. The
   ADI driver works best when used with the DOS driver. See Appendix B
   in the Ami Mouse 97 manual.

*  This installer is completely independent of the main Ami Mouse 97
   installation. The main Ami Mouse 97 installer merely copies the ADI files
   to their own \ADI directory.


To begin the ADI installation:

1) Go to the \ADI directory and copy all the files there to an empty
   floppy disk. Then change to that disk (A:) and type the following:

        SETUPCAD

2) Then follow the install screens to install the Ami Mouse 97 driver
   for AutoCAD Release 10, 11, 12, or later DOS-based AutoCAD versions.


Note:
  Any references to "PC Mouse 3D/6D" encountered during the installation
  and usage of this ADI driver are applicable to the Ami Mouse 97 mouse. The
  Ami Mouse 97 mouse, however, only has one side button--a "Pitch" button.

Advanced DOS Tip:
     You may install directly from the \ADI directory if you first
     SUBST a drive letter to this directory before typing SETUPCAD.
     This is because the installer requires starting from the root
     directory of a drive volume.
