D-Link Support Publishing       \PCNFS\README.TXT               November 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for SUN PC-NFS V5.0

 Contents
 
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 
     A PCI compatible computer
     Sun PC-NFS V5.0
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 

    Please read all methods below and choose the one that matches your
    configuration.

    Method 1 -- NDIS Driver
    
    When using PC-NFS concurrently with LAN Manager, select the "NDIS"
    option from the PC-NFS installation screen.  This option works with
    the NDIS driver included in the provided driver diskette.  Copy the
    files listed below into the \NFS directory of your hard disk.  These
    files will be used in the installation.

    File              Description
    ------------     ----------------------------------------------
    NFS-NDIS.SYS      PC-NFS driver program
    DLKPCI.DOS        NDIS driver program
    PROTMAN.SYS       MS PROTOCOL MANAGER
    NETBIND.EXE       MS LAN MANAGER Netbind

    The following lists the contents of the configuration files:

    CONFIG.SYS                                 AUTOEXEC.BAT
                                     
    SWITCHES=/F                                SET TZ=EST5EDT
    DEVICE=C:\HIMEM.SYS                        C:\DOS\SMARTDRV.EXE
    DEVICE=C:\EMM386.EXE NOEMS RAM             @PROMPT $p$g
    DOS=HIGH,UMB                               PATH=C:\NFS;C:\WINDOWS;C:\DOS;
    BUFFERS=10,0                               C:\LANMAN\NETBIND
    FILES=40                                   SET TEMP=C:\DOS
    STACKS=0,0                                 SET NFSDRIVE=C
    LASTDRIVE=G                                SET NFSPATH=C:\NFS
    SHELL=C:\DOS\COMMAND.COM C:\DOS /P         SET TN_DIR=C:\NFS\TELNET
    DEVICE=C:\NFS\PCNFS.SYS /l40               C:\NFS\PRT *
    DEVICE=C:\NFS\SOCKDRV.SYS                  C:\NFS\NET INIT
    DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
    DEVICE=C:\LANMAN\NFS-NDIS.SYS
    DEVICE=C:\LANMAN\DLKPCI.DOS

    PROTOCOL.INI
    
    [PROTOCOL MANAGER]
        DriverName = PROTMAN$

    [DLKPCI]
        DRIVERNAME = DLKPCI$
    [NFS-NDIS]
        DriverName   = NFSLINK$
        Bindings     = DLKPCI

    To use the NDIS driver, the user needs to obtain a PC-NFS 5.0
    QUIKNDIS diskette which will install all but the PCI Family driver.

    NDIS for DOS Driver Parameter
    
    PROTOCOL.INI of PCI Family Adapter

        Drivername = DLKPCI$

        DATA_RATE = MB10  --> 10M  bps
                    MB100 --> 100M bps
           This parameter specifies the configuration of data rate of
           the network adapter.
           If DATA_RATE does not specified, it will auto detect
           the date rate.

        SLOT =  1
           This parameter specifies the slot number used for notifications.
           For PCI slot, you can specify from 1 to 16.
			
        SIA_MODE = AUTOSENSE      --> Auto detect the media type
                   TP             --> Media type is UTP
                   TP_FULL_DUPLEX --> Media type is UTP and Full-duplex
                   BNC            --> Media type is BNC
           This parameter specifies the connector type configuration of
           the network adapter card .


    Method 2 -- Packet Driver
    
    When using PC-NFS independently, select the "OTHER" option from the
    PC-NFS installation screen.  This option works with the PACKET driver
    included in the provided driver diskette.  Copy the files listed
    below into the \NFS directory of your hard disk. These files will be
    used in the installation.

    File             Description
    ------------     -------------------------------------
    PDNFS.SYS        PC-NFS driver program
    DLKPCI.SYS       Packet driver program

    The following lists the contents of the configuration files:

    CONFIG.SYS                             AUTOEXEC.BAT
                                 
    SWITCHES=/F                            SET TZ=EST5EDT
    DEVICE=C:\HIMEM.SYS                    C:\DOS\SMARTDRV.EXE
    DEVICE=C:\EMM386.EXE NOEMS RAM         @PROMPT $p$g
    DOS=HIGH,UMB                           PATH=C:\NFS;C:\WINDOWS;C:\DOS;
    BUFFERS=10,0                           SET TEMP=C:\DOS
    FILES=40                               SET NFSDRIVE=C
    STACKS=0,0                             SET NFSPATH=C:\NFS
    LASTDRIVE=G                            SET TN_DIR=C:\NFS\TELNET
    SHELL=C:\DOS\COMMAND.COM C:\DOS /P     C:\NFS\PRT *
    DEVICE=C:\NFS\PCNFS.SYS /l40           C:\NFS\NET INIT
    DEVICE=C:\NFS\SOCKDRV.SYS
    DEVICE=C:\NFS\DLKPCI.SYS
    DEVICE=C:\NFS\PDNFS.SYS

    Method 3 -- ODI Driver
    
    When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
    "ODI" option from the PC-NFS installation screen.  This option works
    with the ODI driver included in the provided driver diskette.  Copy
    the files listed below into the \NFS directory of your hard disk.
    These files will be used in the installation.

    File             Description
    ------------     -----------------------------------------
    NFSODI.SYS       PC-NFS driver program
    DLKPCI.COM       ODI driver program
    LSL.COM          NetWare Link Support Layer
    IPXODI.COM       NetWare IPX/SPX Protocol
    NETX.EXE         NetWare Workstation Shell

    The following lists the contents of the configuration files:

    CONFIG.SYS                             AUTOEXEC.BAT
                                 
    SWITCHES=/F                            SET TZ=EST5EDT
    DEVICE=C:\HIMEM.SYS                    C:\DOS\SMARTDRV.EXE
    DEVICE=C:\EMM386.EXE NOEMS RAM         @PROMPT $p$g
    DOS=HIGH,UMB                           PATH=C:\NFS;C:\WINDOWS;C:\DOS;
    BUFFERS=10,0                           SET TEMP=C:\DOS
    FILES=40                               SET NFSDRIVE=C
    STACKS=0,0                             SET NFSPATH=C:\NFS
    LASTDRIVE=G                            SET TN_DIR=C:\NFS\TELNET
    SHELL=C:\DOS\COMMAND.COM C:\DOS /P     LSL
    DEVICE=C:\NFS\PCNFS.SYS /l40           DLKPCI
    DEVICE=C:\NFS\SOCKDRV.SYS              C:\NFS\PRT *
    DEVICE=C:\NFS\NFSODI.SYS /b2           C:\NFS\NET INIT
                                           IPXODI
                                           NETX

    NET.CFG
    
    Link driver DLKPCI
        Frame Ethernet_802.3
        Frame Ethernet_II
        Protocol IPX 0 Ethernet_802.3

    If your Novell FILE SERVER is configured to use the Ethernet_802.3
    frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
    in your CONFIG.SYS file and add an entry in your NET.CFG file
    defining the two frames types.
