*****************************************************************
*****************************************************************

README FILE FOR HEWLETT-PACKARD HPPCL5E PRINTER DRIVER
      WITH SUPPORT FOR THE HP LaserJet 4/4M PRINTER

		 30.1.04 for Windows 3.0
                 
*****************************************************************
*****************************************************************

This README file contains the following information:

     * Hewlett-Packard HPPCL5E Printer Driver Introduction
     * Installation Instructions for Windows 3.0
     * Features of Hewlett-Packard HPPCL5E Printer Driver
     * User Hints
     * HP Personal Peripherals Assist Line

*****************************************************************

INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY 
ACCOMPANY THIS DOCUMENT (collectively referred to as 
Hewlett-Packard HPPCL5E Printer Driver version 1.04) IS PROVIDED 
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.  The 
user assumes the entire risk as to the accuracy and the use of
Hewlett-Packard HPPCL5E Printer Driver version 1.04.  

The HPPCL5E Printer Driver Version 1.04 may be copied and 
distributed subject to the following conditions:

1)  All text must be copied without modification and all pages 
    must be included;

2)  All files on the disk must be copied without modification 
    (the DOS utility DISKCOPY is appropriate for this purpose);

3)  All components of the HPPCL5E Printer Driver Version 1.04 must
    be distributed together; and

4)  the HPPCL5E Printer Driver Version 1.04 may not be distributed
    for profit.

Copyright (c) 1990, 1991, 1992 Hewlett-Packard Company. 
Copyright (c) 1985, 1986, 1987, 1988, 1989, 1990 Microsoft Corp.
Copyright (c) 1988, 1989 Aldus Co. 
All Rights Reserved.

Intellifont is a registered trademark of AGFA Compugraphic, a
division of AGFA Corporation.
IBM PC and PC-DOS are trademarks of International Business 
Machines Corporation.
MS-DOS and Windows are registered trademarks of Microsoft 
Corporation.

***************************************************************

HEWLETT-PACKARD HPPCL5E PRINTER DRIVER VERSION 1.04 INTRODUCTION

***************************************************************

This is a release of the Hewlett-Packard HPPCL5E printer 
driver with support for the HP LaserJet 4/4M printer, which 
includes 600 dpi printer resolution, HP-GL/2, resident TrueType 
font technology and the resident Intellifont typefaces.

***************************************************************

INSTALLATION INSTRUCTIONS FOR WINDOWS 3.0

***************************************************************

To install Hewlett-Packard HPPCL5E printer driver version 
30.1.04 for Windows 3.0

NOTE:  If you intend to use HP Intellifont for Windows to
    produce screen fonts for the Intellifont typefaces in the
    HP LaserJet 4/4M, you must install Intellifont for Windows
    BEFORE installing the printer driver.  Please refer to
    the Intellifont for Windows instructions.

1.  Choose the Control Panel from the Main Group in Program
    Manager.
2.  Choose the Printers icon from the Control Panel window.
    The Printers dialog box appears.
3.  Choose the Add Printer button.
4.  From the List of Printers dialog box, select unlisted
    printer (last printer in list).
5.  Choose install.
6.  Insert the driver disk labeled HPPCL5E version 1.04 
    into your flexible disk drive and specify the
    corresponding directory for the 3.0 version of Windows.    
7.  Highlight "HPPCL5E.DRV" in the Installed
    Printers dialog box.
8.  Choose Configure.
9.  Highlight the correct printer port from the Ports list box.
10. Choose Setup.
11. Make any necessary changes in the Printer Setup screen to 
    reflect your printer's configuration.
12. Choose OK twice.
13. Choose Active.
14. Choose OK.

***************************************************************

FEATURES OF HEWLETT-PACKARD HPPCL5E PRINTER DRIVER VERSION 1.04

****************************************************************

The Hewlett-Packard HPPCL5E Printer Driver version 30.1.04
includes support for the HP LaserJet 4/4M printer and the
following new features:

Support for 600 DPI Printer Resolution.
    The user can switch between 300 and 600 dpi printer 
    resolution via the switch in the setup dialog of the
    driver. 

Support for Graphics Quality.
    At 600 dpi mode in the LaserJet 4/4M, the driver supports 
    graphics resolutions of 600, 300, and 150 dpi.  At
    300 dpi mode the driver supports 300, 150, and 75 dpi.
    The actual graphics resolution settings are denoted by
    the descriptive terms of Low, Medium, and High rather 
    than the actual dpi.
      
Support for the TrueType typefaces.
    All the resident TrueType typefaces in the HP
    LaserJet 4/4M printer are supported.  Other TrueType 
    typefaces are supported by building outlines from 
    the typeface and downloading the characters needed on the 
    fly.  All of the internal TrueType typefaces in the HP 
    LaserJet 4/4M printer are supported in the 19U symbol set
    with the exception of Wingdings in L$ and symbol in AS.

    Hewlett-Packard has made the TrueType format screen
    fonts available for the 35 Intellifont format typefaces
    in LaserJet 4/4M.  These screen fonts are available through
    your local Hewlett-Packard dealer and are not included in 
    this package.  TrueType equivalent screen fonts allow for a 
    more closely integrated Windows 3.0 solution.

Support for the internal Intellifont typefaces.
    All the internal Intellifont typefaces in the HP LaserJet
    4/4M printer are supported in the 19U symbol set.  To 
    obtain WYSIWYG results, use HP Intellifont which supports
    on-the-fly screen fonts to match your printer fonts in
    either Windows 3.0.

Support for HP-GL/2
    Support for HP-GL/2 is in version 1.04.  Under the Options
    Dialog in the Printer Setup, a new option of "Graphics 
    Mode" is available.  Two options are present:  HP-GL/2 or
    Raster.  The first choice enables HP-GL/2 which will 
    increase print performance but may possibly cause 21 Print 
    Overruns in some applications. The second choice disables 
    HP-GL/2 and uses raster only.  The default for Graphics Mode 
    is HP-GL/2. 

    If you do encounter print difficulties in the default 
    Graphics Mode, it is recommended that you change the 
    mode to Raster and try your print job again.  Additional 
    information on this topic may be found in the help files
    that accompany this driver.  Choose Help from the driver
    dialog screens or the HP font installer screens to access
    the HELP information.

Dialog Support for RET
    Another feature added to the Option Dialog is the 
    Resolution Enhancement technology box.  The options here
    are:  Printer Default, Light, Medium, Dark, and Off.

***************************************************************

FEATURES OF HP LaserJet 4/4M NOT SUPPORTED BY HPPCL5E PRINTER
     DRIVER VERSION 1.04

***************************************************************

Bi-directional communication.  This is not currently
  supported in Windows.

***************************************************************

USER HINTS

***************************************************************

On-line help files are included for the HPPCL5E printer driver and
the HP font installer screens.  Choose Help from these screens to
access the HELP information.

***************************************************************

HEWLETT-PACKARD PERSONAL PERIPHERALS ASSIST LINE
(USA and Canada only)

***************************************************************

You can call the Hewlett-Packard Personal Peripherals Assist Line
weekdays between 7 a.m. and 6 p.m.  (Mountain Standard Time), 
except for Wednesday when the hours are 7 a.m. to 4 p.m.:
(208) 323-2551.
