		 _                     __
		- - /, /,            ,-||-,
		  )/ )/ )  '        ('|||  )
		  )__)__) \\ \\/\\ (( |||--)) \\/\\  _-_
		 ~)__)__) || || || (( |||--)) || || || \\
		  )  )  ) || || ||  ( / |  )  || || ||/
		 /-_/-_/  \\ \\ \\   -____-   \\ \\ \\,/

	          WinOne - Super Command Shell for Win32 


WinOne Installation
-------------------

To install WinOne from the windows Program Manager :-

	1. from the File menu select Run...
	2. Enter the full path containing the installation
	   program. For example :-

		A:\SETUP.EXE

	3. Once SETUP has started, simply follow any 
	   further instructions given.

SETUP  will  only create  one directory  and  one  sub-directory  and copy  all
the  relevant  files into these  directories,  then a  Program Manager group is
created and the  WinOne icon is placed inside.
	
To  uninstall WinOne, simply  delete all the files in the  directories in which 
WinOne was installed,  and delete the group that the WinOne icon was placed in.


Network Installation
--------------------

WinOne  must be  installed  on each  client computer  connected to the network, 
otherwise WinOne will not function correctly. Each client computer will contain
a  windows  directory,  which  WinOne  will  use  to  store it's  configuration
information, so that,  each user will be able to configure WinOne to suit their
own needs.  All  network drives  will be accessible  from  WinOne,  after it is
installed.  Follow the  instructions for  installing  WinOne from  the  Program
Manager in the WinOne Installation section.


Installing an Upgrade
---------------------

When  installing an upgraded version of WinOne, simply install  WinOne into the
same  directory as  the previous version.  WinOne will then be  able to use the
same configuration files as your previous version.  Otherwise, WinOne will need
to be re-configured from scratch. 

Make sure that an earlier version of  WinOne is not running while installing an
upgraded version of WinOne.  If WinOne is set as your  default start up  shell, 
then restore the  Program Manager as your start up shell, before installing the
upgrade.

Never run the SETUP.EXE program from WinOne itself, to install an upgrade.  Use
the Program Manager  instead, as described in the section  WinOne Installation. 

If possible reboot Windows after WinOne has been installed,  before running the 
upgraded version.


Archive Contents
----------------

The shareware version of WinOne contains the following files :-

	------------------
	 File name
	------------------
	 ARGS.CPP
	 ARGS.DSK
	 ARGS.EXC
	 ARGS.H
	 ARGS.IDE
	 CTL3D32.DLL
	 CLOSE.PIF
	 DESCRIPT.ION
	 DIBWAPI.DLL
	 ICON.RC
	 INACTIVE.PIF
	 LOGO.EXC
	 REGISTER.FRM
	 UNZIP.EXC
	 WIN_ONE.EXE
	 WIN_ONE.HLP
	 WIN_ONE.TXT
	 WOEXT.EXE
	 WOIO.H
	 WOIO.HLP
	 WOIO.LIB
	 WOS32.DLL
	 WOS32.EXE
	 WOS32S.DLL
	------------------

Note: The files included in the  shareware version  are  NOT  compressed  using
COMPRESS.EXE  in order to produce a smaller archive.  However, the full version
is still compressed using  COMPRESS.EXE and is supplied on  either  two 3.5" or
two 5.25" floppy disks.


System Requirements
-------------------

WinOne requires the following to run :-

	1. an IBM PC or 100% compatible
	2. a 386 CPU or better
	3. Win32s version 1.25 or Windows 95 or Windows NT 3.5 or higher.

Note: WinOne will still run under earlier versions of Win32s,  however the bugs
in  earlier versions of  Win32s are quite noticeable from WinOne.  For the best
performance,  install Win32s version 1.25 or higher,  which at the time of this
release can be downloaded from MicroSoft :-

	Site: ftp.microsoft.com
	Path: /Softlib/MSLFILES
	File: pw1118.exe

Win32s is NOT supplied with WinOne.

Trademarks
----------

All  trademark  or  brand  names mentioned  are  properties of their respective
companies.
