
StreamWorks (tm) - WNETVIEW
-------------------------------------------------------------------
(C) Copyright 1994-1995 Xing Technology Corporation
                        1540 W. Branch Street
                        Arroyo Grande, California 93420
                        USA
                        email:   streams@xingtech.com
                        www:     http://www.xingtech.com
-------------------------------------------------------------------

                 ͻ
                  WNetview Command Line Parameters: 
                 ͼ

-A:      Forces the program to exit if the main window loses focus.

-B:      Turns off the rounded edge subwindow and lets the video fill the
         whole window.

-C#:     Starts up channel # immediately upon program launch.

-D:      Debug Mode.  Does nothing.

-E:      Forces the main window to an icon when a video is not playing.

-FA0:    Select ReelMagic Audio Decoder.
-FA1:    Select Software Audio Decoder.
-FV0:    Select ReelMagic Video Decoder.
-FV1:    Select Software Video Decoder.

-G:      Tells the ReelMagic board to pass all video through rather than
         trying to let the mouse and other windows cover up the video
         window while video is playing.  For very unruly video cards.

-H#:     Set height of main window.

-IV#:    Set Video Sync tolerance in bytes, which is the amount of wiggle
         room that the video buffer is allowed before frames are added or
         dropped to compensat.

-IA#:    Set Audio Sync tolerance.  See "-IV#".

-Jip:    Sets the IP address for system pings. "I" messages, as it were.

-K#:     Sets palette index of background of video window.  You might try
         -K0 for slightly unruly video cards.

-L:      Make the main window a child of the currently active one.

-M<file>:Execute a second program as part of the startup.

-NR:     Deactivates all attempts to decode video or deal with decoder
         hardware / software.

-NN0:    Deactivates all network communications.
-NN2:    Deactivates control socket, but allows listening to live feeds.

-O:      Creates a separate task to handle the network and video playback.

-PA#:    If # is 1, activates audio playback.  If 0, deactivates it.
-PV#:    If # is 1, activates video playback.  If 0, deactivates it.

-Q#:     Obsolete.

-R<code>:Sets instant remote access code.
         <code> = {Server address}:{File Name or number}.

         Examples:
             -RSunshine:Apollo
             -R204.62.160.75:13
             -RFiddle:12
             -R204.62.160.78:Debate

-S#:     # is a hex DWORD which sets the main window style in accordance
         with standard windows 3.1 window styles.

-T:      Turn off tool bar.

-U:      Simplifies program display for Mosaic.

-V#:     Specifies a hex DWORD whose 32 bits select which buttons will be
         displayed on the tool bar.  The easiest way to use this is to go
         into WNetView, use the button deleter to remove any buttons you
         don't want, and then write down the value for "ButtonSelector" in
         the "WNETVIEW.INI" file for future reference.  You may then go
         back to that state by specifying this value on a command line.

-W#:     Set main video window width.

-X#:     Set main video window X Position.

-Y#:     Set main video window Y Position.

-Z#:     Set Network bandwidth in bits per second.

-#A:     (That "#" is really an "#") Deactivate frame dropping / adding for
         Audio.

-#V:     Deactivate frame dropping / adding for Video.

-!cP#:   Manually sets a port for a given channel.  "c" is the Channel.
         Channels are 1-9, 0 = 10 and S is the Server.

-!#c<ip>:Manually sets the IP Address for a given channel.


