/ Yleiset /

Antennien mitoitusten laskentaan tehtyjä
ohjelmia.

Caller ID ohjelma, eli nayttaa numeron
ruudulla

Eletroniikan harrastajan unelmatyökalu.
Tee kytkentä ja testaa se samalla!!

COILS 1.1 COILS is a utility to help
electronics hobbyists and technicians wind
their own coils and inductors. It calculates
the parameters of a hand-wound coil based on
desired inductance, no. of turns, wire gauge,
coil diameter, coil length, etc. and prints
out a table of values to the screen or
printer. Freeware.

Circuit Shop 1.09Circuit Shop is an easy to use graphical CAD tool to allow simple digital and analog 
electronic circuits to be constructed and analyzed and includes: Drawing tools to 
construct simple electronic circuit schematics consisting of digital and analog devices 
such as logic gates, op amps, dependent sources, ICs, transistors, resistors, batteries, 
etc. A tutorial which teaches basic digital and analog electronic concepts.Digital circuit
design and analysis capability using digital sources, logic gates and digital displays.
Analog circuit design and ulation capability to perform DC analysis, sinusoidal steady 
stateanalysis and frequency response. Shareware. The registered version costs $29.99. 

Circuit Shop 1.10Circuit Shop is an easy to use graphical CAD tool to
allow simple digital and analog electronic circuits to be
constructed and analyzed and includes: Drawing tools
to construct simple electronic circuit schematics
consisting of digital and analog devices such as logic
gates, op amps, dependent sources, ICs, transistors,
resistors, batteries, etc. A tutorial which teaches basic
digital and analog electronic concepts.Digital circuit
design and analysis capability using digital sources,
logic gates and digital displays. Analog circuit design
and ulation capability to perform DC analysis,
sinusoidal steady stateanalysis and frequency
response. Shareware. The registered version costs $29. 
http://ourworld.compuserve.com/homepages/Cherrywood

"Circuit Shop 1.10 Manual in PDF formatCircuit Shop is an easy to use graphical CAD tool to
allow simple digital and analog electronic circuits to be
constructed and analyzed. This is the Circuit Shop 1.10 Manual in PDF format readable and printable with Acrobat Reader. The manual consists of two parts: Part one 
provides Circuit Shops reference manual. Part two 
provides Circuit Shops basic electronics tutorial. 
http://ourworld.compuserve.com/homepages/Cherrywood
"

Circuit Shop 1.09 Manual in PDF formatCircuit Shop is an easy to use graphical CAD tool to allow simple digital and analog 
electronic circuits to be constructed and analyzed. This is the manual in PDF format.

DC-CAD v1.0 Tällä ohjelmalla voit suunnitella piiri- levyn ja piirtää 
kaavion puhtaaksi. Tukee LaserJet:iä, ProPrinter:iä ym. ja 
jos eivät riitä, niin tee kirjoitinohjain ohjaus- koodien 
perusteella itse. Sharewarea.

DrLed v1.0áBy Saxi/EP. Niille ketkä ovat rakentaneet MB 11/98 
tee-se-itse ledisysteemin. Monipuolisempi ohjelma kuin 
MB:n LEDMaster. Voit muokata ledeillesi erilaisia sarjoja 
joissa voi olla 256 vaihetta. DOS/Win9X.

Easytrax 2.06  by Protel technology
Lähes ammattitason
piirilevyn suunnitteluohjelma! Toimii vaikka
286:lla ja sisältää näyttöajurit aina SVGA-
tiloihin asti. DOS-ohjelma. Tukee myös monia
kirjoittimia. Ilmainen.

ELCAD Electronics Circuits CAD v1.10A program that draws the circuit used and then queries the 
user for knowns. It then computes unknowns: resistors, 
capacitors, inductors, transistor circuits, PUTS, 
unijunctions, AC, DC, heatsinks, phase angles, transformers,
555 timers and more. Displays formulas used, on simpler 
circuits. Very user friendly. Registration $26.00

Micro-Cap V -piirilevysuunnitteluohjelman
demoversio

MORSE v1.18Radioamatöörin sähkötystentin harjoitteluohjelma by 
OH9OM & OH2DN.

PC IR Remote Control
Mahdollistaa infrapunakauko-ohjauksella
toimivien laitteiden ohjauksen tietokoneella
Sisältää kytkennät PS-kuvina ja tarvittavat
ohjelmat.

RATEK v1.00Radioamatööritutkinnon tekniikka modulin (T1) 
harjoitteluohjelma by OH2AUM & OH2DN.

RATUTKA v2.07Radioamatööritutkinnon harjoitteluohjelma by OH2AUM & OH2DN.

RCC v2.1 Resistor Color Code From TC
Electronics, the makers of ACL: Just match
the colors to get a fast easy readout of
coded values on resistors or input the values
to get the colors for resistors. Calculates
total ohms value on parallel & series
connected resistors. Calculates usable
tolerance range.

Värikoodit resistanssiksiOhjelma muuntaa vastuksen värikoodin resistanssiksi ja päinvastoin.

Rezistor 2.0 for Windows 95/98/NTThis program helps you to find out what type of resistor you have by its color marks. 
Freeware by Ruslan N. Longinov, MORTIO Soft. http://mortio.virtualave.net

Switchers Made Simple v4.2.1By: National Semiconductor. Tällä ohjelmalla voit erittäin 
helposti suunnitella hakkurimuuntajan, joka muuntaa esim. 
12V->230V. Vaatii MS-DOS 3.3 ja 500kB muistia.

WATTS v2.1  - Stereo Wattage Calculator
WATTS was written to aid the electronics
technician in finding the output wattage
of an audio amp or stereo quickly and
efficiently.  This program will display
the output RMS wattage at a glance.  You
should find the programs interface
simple and easy to use.  Speeds service
work and hobby construction.
Shareware by Paul Graydon, $3.00 to register

"Working Model v3.0 demoFast and Powerful Engineering Analysis for Desktop PCs. 
Powerful tool for engineering analysisanimationand 
prototyping. It saves time and money in the design process 
by allowing you to create and analyze dynamic physical 
systems on the computer prior to building costly prototypes.
Windows 95"